8030 – 2-Jaw Adjustable Gear Puller – 15″

• Jaw Spread: 15″ (381mm) 38cm
• Jaw Reach: 15″ (381mm) 38cm
• Center Screw Length: 13″ (330mm) 33cm
• Center Screw Diameter: 11/16″
• Center Screw TPI: 16
• Total Capacity: 13 tons (11.8MT) 11820 Kg

Instructions

1. Hook the jaws to the desired gear, component, etc. being pulled/removed.
2. Jaws can be reversed to grab the gear, component, etc. from the outer or inner edge.
3. Turn the thrust screw until it contacts the center shaft, apply pressure until the jaws are secure.
4. Slowly turn the center screw until the desired component has been removed.