- The turbo system leakage tester helps locate air leaks in the components by plugging the output side of the turbo and plugging the intake inlet
- Air is applied through one end of the adapter to show the presence of leaks within the system
- Kit features a pressure gauge, shut off valve and pressure regulator
- Comes with 6 pairs of stepped adapters to fit most size hoses
- This setup can also be used on cooling system hoses
WARNING: Injury could occur if system is over pressurized – We Recommend NOT exceed 15 PSI
Components
Includes adapters, sizes:
- 7912X01 – 16mm / 22mm – Inlet Adapter w/ Coupling
- 7912X02 – 16mm / 22mm – Block Adapter
- 7912X03 – 25mm / 32mm – Inlet Adapter w/ Coupling
- 7912X04 – 25mm / 32mm – Block Adapter
- 7912X05 – 35mm / 45mm – Inlet Adapter w/ Coupling
- 7912X06 – 35mm / 45mm – Block Adapter
- 7912X07 – 50mm / 60mm – Inlet Adapter w/ Coupling
- 7912X08 – 50mm / 60mm – Block Adapter
- 7912X09 – 65mm / 75mm – Inlet Adapter w/ Coupling
- 7912X10 – 65mm / 75mm – Block Adapter
- 7912X11 – 80mm / 90mm – Inlet Adapter w/ Coupling
- 7912X12 – 80mm / 90mm – Block Adapter
- 7912X13 – Pressure Gauge Assembly
