- Utilize this tool to extract the splined axle end from the wheel flange or hub of rear-wheel drive and front-wheel drive 4-LUG Euro applications
- Compatible with hubs featuring a hub lip diameter of up to 65mm. (Not suitable for 72.56mm or 66.6mm wheel hubs)
- Includes 3/4″ hex drive center screw with jam nut
- For use with slide hammer
- Push Bolt: Length 5.5″ x 5/8″ – 18 TPI
Services most Bolt Patterns below:
| 4 x 100mm (4 x 3.94″) |
| 4 x 110mm (4 x 4.33″) |
| 4 x 4.25″ (4 x 108mm) |
| 4 x 4.5″ (4 x 114.3mm) |
| 5 x 100mm (5 x 3.94″) |
| 5 x 110mm (5 x 4.33″) |
| 5 x 112mm (5 x 4.41″) |
| 5 x 115mm (5 x 4.52″) |
| 5 x 120mm (5 x 4.72″) |
| 5 x 4.25″ (5 x 108mm) |
| 5 x 4.5″ (5 x 114.3mm) |
| 5 x 4.75″ (5 x 120.7mm) |
| 6 x 115mm (6 x 4.52″) |
| 6 x 4.5″ (6 x 114.3mm) |
