- Holds Harmonic Balancer in place when removing or installing center bolt of Ford Taurus Pulley Extension
- Tool can be used to turn the engine to gain access to the torque converter bolts and hold the engine stationary while loosening and tightening them
- Tool provides easy method to hold crankshaft while loosening and tightening harmonic balancer retaining bolt
- Harmonic balancer removal is necessary to replace front engine seal, replace timing chains, and remove engine heads
- On 96-05 Ford Taurus and Mercury Sable this tool makes removing and replacing the serpentine belt extension pulley much easier. It provides a good method of holding the engine when removing the extension pulley
- Use with 1/2″ square drive tools
- Can use 8mm x 1.25 bolt to hold tool to balancer for some applications
- Won’t warp balancer & no need to lock flywheel!
Click HERE for instructions
Application Details
| Make |
Model |
Engine |
Year |
| Ford |
F-150 |
3.5L |
2013-2016 |
| Ford |
Contour |
2.5L |
1994-2000 |
| Ford |
Taurus |
2.5L |
1992-2007 |
| Jaguar |
S-Type |
2.5L & 3.0L |
2000-2008 |
| Lincoln |
LS |
3.0L |
2000-2006 |
| Mercury |
Sable |
3.0L |
1992-2005 |
| Mercury |
Couger |
2.5L |
1999-2002 |
| Mercury |
Mystique |
2.5L |
1994-2000 |
| Mazda |
Tribute |
3.0L |
2001-2011 |
| Make |
Model |
Engine |
Year |
| Chrysler |
Sebring |
2.4L |
1996-2006 |
| Dodge |
Stratus |
2.4L |
1995-2005 |
| Dodge |
Caravan |
2.4L |
1996-2007 |
| Plymouth/Chrysler |
Voyager |
2.4L |
1996-2003 |
| Chrysler |
Vans |
3.3L V6 |
1990–2010 |
| Chrysler |
Cars |
3.8L V6 |
1994–2011 |
| Chrysler |
Cars |
3.3L V6 |
1993–1997 |
| Chrysler |
Cars |
3.5L V6 |
1993–1997 |
| Chrysler |
Cars |
2.7L V6 |
1998–newer |
| Chrysler |
Cars |
3.2L V6 |
1998–newer |
| Chrysler |
Cars |
3.5L V6 |
1998–newer |
Dimensions
5/16″ thick steel base welded to three 3/4″ prongs
OAL: 4.45″
OAH: 1.25″
Pin(s) Height from base: .95″
